Overview
HX-3 Key Features List
Three isolated headphone outputs with individual volume controls.
125 dB dynamic range with flat frequency response.
Durable 1/4-inch connectors, panel mounted for strength.
Stereo or mono monitoring.
Peak LED indicates headphone overload.
Two balanced XLR line level inputs or unbalanced 1/4-inch and 1/8-inch stereo inputs.
Loop Output to connect additional HX-3’s in series.
All-metal connectors solidly mounted to the chassis for durability and RF immunity.
Free from “Pin-1” grounding problems.
Internal battery-power for up to 18 hours from two AA alkaline batteries.
Chassis-isolated 5 to 18 VDC input for easy external DC powering.
Power LED indicates low battery power.
High strength, extruded aluminum chassis with protective metal end panels.
The HX-3: Portable Headphone Distribution Amplifier
The compact HX-3 Headphone Distribution Amplifier is the perfect accessory to quickly provide three high-performance stereo headphone feeds with individual level controls from line-level sources. The HX-3 can produce very high headphone levels with extremely low noise and distortion.
Great for Radio, TV, Film, and Music Productions
The HX-3 accepts balanced XLR line-level inputs or unbalanced 1/4-inch and 1/8-inch stereo inputs. Its 1/4-inch loop-out can connect multiple HX-3’s for additional headphone outputs. Headphones are connected to panel-mounted 1/4-inch stereo connectors.
The HX-3 has a durable aluminum chassis to withstand the punishment of field and studio environments. The unit is powered by inexpensive batteries (two-AA) or external 5-18 VDC.
The HX-3 can add headphone outputs to the 552, 302, MM-1, and USBPre-2.
What’s in the box:
概述
HX-3主要功能列表
三个单独音量控制的独立耳机输出。
125dB动态范围,频率响应平坦。
耐用的1/4英寸连接器,面板安装,强度高。
立体声或单声道监控。
峰值LED指示耳机过载。
两个平衡XLR线电平输入或不平衡1/4英寸和1/8英寸立体声输入。
回路输出,用于串联连接其他HX-3。
所有金属连接器牢固地安装在机箱上,具有耐用性和射频抗扰性。
无“引脚1”接地问题。
两节AA碱性电池可为内部电池供电长达18小时。
底盘隔离5至18 VDC输入,便于外部直流供电。
电源LED指示电池电量低。
高强度挤压铝底盘,带有保护金属端板。
HX-3:便携式耳机分配放大器
紧凑型HX-3耳机分配放大器是快速提供三个高性能立体声耳机馈送的完美配件,可从线电平源进行单独电平控制。HX-3可以以极低的噪声和失真产生极高的耳机音量。
非常适合广播、电视、电影和音乐制作
HX-3接受平衡XLR线路电平输入或不平衡1/4英寸和1/8英寸立体声输入。它的1/4英寸环路输出可以连接多个HX-3,用于额外的耳机输出。耳机连接到面板安装的1/4英寸立体声连接器。
HX-3有一个耐用的铝制底盘,可以承受野外和摄影棚环境的影响。该装置由廉价电池(两节AA)或外部5-18 VDC供电。
HX-3可以为552、302、MM-1和USBPre-2添加耳机输出。
盒子里有什么:
HX-3耳机放大器
耳机适配器电缆(1/4英寸至1/8英寸)
同轴母电源连接器
4粘性橡胶“保险杠”
咨询表单:
咨询内容:
你还没有添加任何产品