Overview
The A10-RACK offers convenient mounting, powering, RF, and audio connectivity for four uni- or SuperSlot wireless receivers in its 1 RU chassis. It is designed for dual-channel receivers from Audio Limited, including the A10-RX, plus slot receivers from Lectrosonics and Wisycom. The A10-RACK includes built-in antenna distribution with powering for active antennas. Up to eight channels of audio from single or dual-channel receivers appear on both its XLR outputs and over Dante™ audio-over-Ethernet.
accepts up to four, two-channel wireless receivers (receivers sold separately)
audio output on analogue/AES3 and Dante
built-in power distribution
built-in antenna distribution with selectable power for active antennas
powered from 4-pin XLR input (10-18 VDC)
USB port for firmware updates and serial access
概述
A10-RACK为其1 RU机箱中的四个单槽或超级槽无线接收器提供了方便的安装、供电、RF和音频连接。它专为音频有限公司(Audio Limited)的双通道接收机设计,包括A10-RX,以及莱科特洛斯电子公司(Lectronics)和Wisycom的插槽接收机。A10-RACK包括为有源天线供电的内置天线分布。XLR输出和Dante上***多可显示来自单声道或双声道接收器的八声道音频™ 以太网音频。
***多可接受四个双通道无线接收器(接收器单独出售)
模拟/AES3和Dante上的音频输出
内置电源分配
有源天线功率可选择的内置天线分布
由4针XLR输入供电(10-18 VDC)
用于固件更新和串行访问的USB端口
Dante™ audio networking offers the convenience of a single CAT5 Ethernet connection to carry the audio signal from the eight channels of the A10-RACK. Dante is alway active, whether the receiver is set for analogue or AES digital output. When used with other Dante-compatible devices, complex systems with comprehensive routing can be built. Monitoring and routing of signals from transmitters to receivers is simplified with Dante Controller, a free software application from Audinate.
音频网络提供了单个CAT5以太网连接的便利性,以承载来自A10-RACK的八个通道的音频信号。无论接收器设置为模拟或AES数字输出,Dante始终处于活动状态。当与其他Dante兼容设备一起使用时,可以构建具有***路由的复杂系统。Audinate的免费软件应用程序Dante Controller简化了从发射机到接收机的信号监控和路由。
RF Distribution
The A10-RACK has an integrated RF distribution amplifier. Its two RF inputs offer selectable 12 V powering for active antennas, plus loop-thru connections for another A10-RACK. A single pair of antennas can be used for up to 16 audio channels.
Powering
The A10-RACK is powered from standard 4-pin XLR, 10-18 VDC power supplies, such as Sound Devices XL-WP4 (shown right). Power supplies require 3 amps (minimum) for proper powering of the A10-RACK and connected slot receivers.
射频分布
A10-RACK具有集成RF分配放大器。它的两个射频输入为有源天线提供可选的12V电源,以及另一个A10-RACK的环路连接。一对天线***多可用于16个音频通道。
通电
A10-RACK由标准4针XLR、10-18 VDC电源供电,如Sound Devices XL-WP4(如右图所示)。电源需要3安培(***小值)才能正确为A10-RACK和连接的插槽接收器供电。
咨询表单:
咨询内容:
你还没有添加任何产品